{"id":654,"date":"2026-11-03T18:44:23","date_gmt":"2026-11-03T10:44:23","guid":{"rendered":"http:\/\/www.goldentouch-eg.com\/blog\/?p=654"},"modified":"2026-11-03T18:44:23","modified_gmt":"2026-11-03T10:44:23","slug":"how-to-check-the-quality-of-gb-screw-423b-7e33bb","status":"publish","type":"post","link":"http:\/\/www.goldentouch-eg.com\/blog\/2026\/11\/03\/how-to-check-the-quality-of-gb-screw-423b-7e33bb\/","title":{"rendered":"How to check the quality of GB Screw?"},"content":{"rendered":"

As a GB screw supplier with over 12 years in the fastener industry, I\u2019ve seen first-hand how a lot of buyers cut corners when checking screw quality\u2014especially with GB standard screws. A while back, a small construction firm reached out to me with a batch of GB 8.8-grade hex bolts they\u2019d bought from another supplier; half of them snapped during assembly, and their entire project got delayed for three days. That\u2019s when I realized how many people don\u2019t know the right way to verify GB screw quality, beyond just checking a label or a price tag. Today, I\u2019m breaking down the steps we use in our own warehouse every time we receive a shipment, and what you should do before you place any order with a supplier. GB Screw<\/a><\/p>\n

<\/p>\n

First, let\u2019s start with the basics: what GB screws even are. GB stands for \u201cGuobiao,\u201d which is China\u2019s national standard for fasteners. Unlike ISO standards that are more internationally focused, GB standards are tailored to specific use cases in Chinese and global manufacturing, construction, and automotive industries. For example, GB\/T 5782 is for ordinary hex head bolts, GB\/T 70.1 is for hex socket head cap screws, and GB\/T 6170 is for hex nuts. Each of these has strict requirements for material, dimensions, tensile strength, surface finish, and corrosion resistance that non-compliant screws will never meet.<\/p>\n

The first check I do with any incoming batch is a dimensional audit. A screw that looks the same size as it should be on paper might be slightly off, and that small difference can cause huge problems. Last year, we had a customer who tried to use non-GB bolts for a metal fabrication project; the bolt shank diameter was 0.2mm smaller than GB\/T 5783 specifies, so the hole in their frame was too big, and the joints wobbled. Dimensional checks aren\u2019t hard, but you need the right tools: a digital caliper (accurate to 0.01mm), a pitch gauge for threads, and a straight edge for head alignment. Here\u2019s what to measure: the major diameter (the widest part of the shank), the minor diameter (the narrow part just below the threads), thread pitch (the distance between two adjacent threads), head height, and overall length. For GB screws, every dimension is set to a tolerance\u2014so if a bolt is supposed to have a major diameter of 10mm, it should fall within 9.95mm to 10.05mm, depending on the tolerance class (usually class 6g for external threads and 6H for internal threads for general use). We randomly pick 50 screws per 1,000-piece batch to test; if even 2 of them are out of tolerance, the entire batch gets flagged for rework or return. I once had a supplier who sent a batch of GB 12.9-grade bolts with heads 0.5mm too short\u2014those heads would have snapped if we\u2019d used them in a high-tensile application, so we sent them back immediately.<\/p>\n

Next up, material verification. GB screws are made from different materials depending on their grade: low-carbon steel for general use, medium-carbon steel for 8.8-grade, alloy steel for 10.9 and 12.9 grades, and sometimes stainless steel (304, 316) for corrosion-resistant applications. The easiest way to check if a screw is made of the right material is with a magnet, but that\u2019s only for ferrous metals. If a screw is supposed to be 304 stainless steel, it should not stick to a strong magnet; if it does, it\u2019s probably 201 stainless, which is cheaper, less corrosion-resistant, and doesn\u2019t meet GB standards. For steel grades, we use a portable alloy analyzer (we\u2019ve got a budget-friendly one that costs around $500) to test the carbon content. For example, GB 8.8-grade bolts need a minimum of 0.45% carbon; if the analyzer shows less than that, the bolt won\u2019t have the tensile strength it\u2019s supposed to. Another trick: file a tiny bit of the screw\u2019s shank and check the spark pattern when it\u2019s ground. High-carbon steel produces bright, long sparks with multiple branches, while low-carbon steel produces short, dim sparks. Non-compliant screws often use recycled metal that has inconsistent carbon content, so their sparks will be uneven.<\/p>\n

Then, the critical one: mechanical testing, especially tensile strength and hardness. Tensile strength is the maximum load a screw can handle before breaking, and hardness relates to its resistance to deformation. GB standards specify exact values for every grade: 8.8-grade screws have a minimum tensile strength of 800 MPa and a Rockwell hardness of 22-32 HRC; 10.9-grade is 1000 MPa and 33-39 HRC; 12.9-grade is 1200 MPa and 39-44 HRC. You don\u2019t have to have a huge lab to do basic tests. For hardness, we use a portable Rockwell hardness tester that we can bring right to the warehouse; we test 10 screws per batch, testing the head (not the shank, which can be harder or softer due to heat treatment) to get an accurate reading. If a bolt is too soft, it will strip or bend under load; if it\u2019s too hard, it will snap. I\u2019ve seen suppliers who skip heat treatment to cut costs, so their 8.8-grade bolts have a hardness of 40 HRC\u2014way too high, and they shatter when tightened with a torque wrench. For tensile strength, if you don\u2019t have a universal testing machine, you can do a simple pull test with a winch or a heavy-duty clamp: take a screw, thread it into a nut of the same GB standard, apply a torque equal to or slightly higher than the rated torque for that grade, and check if it breaks. For 8.8-grade M10 bolts, the rated torque is about 45 N\u00b7m; if it breaks at less than that, it\u2019s not meeting GB requirements.<\/p>\n

Surface finish is another often-overlooked check, but it\u2019s important for both aesthetics and performance. GB screws come in different finishes: zinc plating for general corrosion resistance, black oxide for high-temperature applications, hot-dip galvanizing for outdoor use, and plain finish for machining. The finish shouldn\u2019t have any burrs, cracks, or rust spots. For plated screws, the plating thickness is important\u2014GB requires zinc plating to be at least 5 microns thick for general use; too thin, and the screw will rust quickly, especially in humid environments. You can check plating thickness with a coating thickness gauge, which is affordable and easy to use. Another thing to look for is the marking on the head. All GB screws are marked with a grade symbol: 4.6, 4.8, 8.8, 10.9, 12.9. The first number is 1\/100 of the minimum tensile strength, the second is 1\/10 of the ratio of yield strength to tensile strength. A fake 8.8-grade bolt might have a marking that looks right, but if you test its tensile strength, it will be way lower. We reject any batch where more than 5% of the screws are missing or have unclear head markings\u2014those are almost always non-compliant.<\/p>\n

Wait, there\u2019s one more thing: packaging and documentation. A legitimate GB screw supplier will provide a test report (also called a COC, Certificate of Conformity) for every batch, which includes the dimensions, material grade, hardness, tensile strength, and finish. Don\u2019t take a supplier\u2019s word for it\u2014ask for the COC, and cross-reference the lot number on the report with the lot number on the packaging. Cheap suppliers will reuse old COCs or fake them, so we cross-check the numbers with our third-party testing lab every quarter. Packaging should also be labeled clearly with the GB standard number, size, grade, and lot number. If a bag of screws is only labeled \u201chex bolt\u201d with no GB number, it\u2019s not a true GB screw.<\/p>\n

I know what some of you are thinking: \u201cThis seems like a lot of work. Can\u2019t I just buy the cheapest batch?\u201d Let me tell you a story about a client of ours who did that. A few years back, a small automotive parts manufacturer bought 50,000 M6 GB 10.9 screws from a supplier that was 30% cheaper than us. They didn\u2019t do any testing\u2014just checked the price and the grade marking. Half of the screws snapped during a stress test for a car door hinge, and they had to recall 2,000 parts. The recall cost them $250,000, plus they lost a long-term contract with a major automaker. That $0.05 per screw they saved cost them hundreds of thousands of dollars. Good quality GB screws might cost a bit more upfront, but they save you money on delays, recalls, and replacements in the long run.<\/p>\n

Now, if you\u2019re not sure where to start, here\u2019s a quick step-by-step checklist to keep in mind before you buy any GB screws: 1. Confirm the exact GB standard number for your application (e.g., GB\/T 5782 for hex head bolts, GB\/T 70.1 for socket screws). 2. Check the head marking: it should match the grade you need, and be clear and legible. 3. Do a dimensional check with a caliper and pitch gauge\u2014measure at least 10 screws per batch. 4. Test the material with a magnet and, if possible, an alloy analyzer. 5. Do a hardness test to make sure it meets GB requirements. 6. Ask for a COC and verify the lot number matches the packaging. 7. Check the surface finish for burrs, cracks, and correct plating thickness.<\/p>\n

<\/p>\n

At our company, we don\u2019t just sell screws\u2014we stand behind every batch we ship. All our GB screws go through a three-step quality check: first, a warehouse team member does a visual and dimensional check, then a second team member tests hardness and material, and finally, a third person reviews the COC and lot numbers before the order is packed. We\u2019ve been supplying GB screws to manufacturers and construction companies across the country for over a decade, and we\u2019ve never had a recall due to non-compliant screws.<\/p>\n

Self-Clinching Fasteners<\/a> If you\u2019re tired of dealing with suppliers who cut corners on GB screw quality, or if you\u2019re not sure how to verify the screws you\u2019re currently using, feel free to reach out to our team to discuss your requirements. We can help you confirm the right GB standard for your project, provide samples for testing, and answer any questions you have about quality checks.<\/p>\n

References<\/h2>\n
    \n
  1. GB\/T 196-2003, General Purpose Threads – Basic Dimensions<\/li>\n
  2. GB\/T 3098.1-2010, Mechanical Properties of Fasteners – Bolts, Screws and Studs of Carbon Steel and Alloy Steel<\/li>\n
  3. ASME B18.18.2M-2011, Fastener Quality Assurance Program Requirements<\/li>\n
  4. International Organization for Standardization, ISO 898-1:2009, Mechanical Properties of Fasteners – Bolts, Screws and Studs<\/li>\n<\/ol>\n
    \n

    Zhanci Hardware Products Co.,Ltd<\/a>
    Zhanci Hardware is one of the most professional GB screw manufacturers and suppliers in China, proviDINg bulk new design products for sale. Welcome to wholesale high quality GB screw in stock at cheap price from our factory. for customized and OEM services, contact us now.
    Address: NO.5 BUILDING SHUOYI INDUSTRIAL PARKJINGLONG VILLAGE, ZHENLONG TOWN HUIZHOU, 516227 GD,CHINA
    E-mail: hzzhanci@vip.163.com
    WebSite:     https:\/\/www.clichnuts.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    As a GB screw supplier with over 12 years in the fastener industry, I\u2019ve seen first-hand … How to check the quality of GB Screw?<\/span>Read more<\/a><\/p>\n","protected":false},"author":159,"featured_media":654,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[617],"class_list":["post-654","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-gb-screw-44b6-7e655a"],"_links":{"self":[{"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/posts\/654","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/users\/159"}],"replies":[{"embeddable":true,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/comments?post=654"}],"version-history":[{"count":0,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/posts\/654\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/posts\/654"}],"wp:attachment":[{"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/media?parent=654"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/categories?post=654"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.goldentouch-eg.com\/blog\/wp-json\/wp\/v2\/tags?post=654"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}